120W Outdoor LED Wall Light UL & DLC certified
1. Input Voltage:100-277V
2. Lumen efficacy:120lm/w.
3. Optional color temperatures:3000~5700K ±500K
4. Excellent color rendering index: Ra>70
5. Working environment temp: -40~ 50c
6. Power factor:≥0.9
7.Shell protection:IP65,outdoor use
FEATURES:
— Die-casting aluminum body,outer surface with spray paint treatment,elegant apperance and excellent heat dissipation.
— Use PHILIPS chips with high brightness,long life,low thermal resistance and low power consumption.
— Used design of US general junction box,easy operating.
— Replace the traditional lights.
— Photocell is optional
Model | Pwer | Voltage | CCT | Luminous Flux | Light distribution | Size(mm) | UL number |
LEDBG120W002 | 120W | 100-277V | 3000~5700K | 14400lm | half cut-off | 465*232*327 | E477985 |
LED WALL PACK
INPUT WATTAGE : 30W, 40W, 50W, 60W, 80W, 100W, 120W, 135W, 150W
1. lnput Voltage:100-277V
2. Lumen efficacy: 110lm/w.
3. Optional color temperatures:2700~5700K ±500K
4. Excellent color rendering index: Ra>70
5. Working environment temp: -40- 50 c
6. Power factor: ≥0.9
7. Shell protection: IP65
1. Disassembly the old luminaire cavity and keep the old base on the wall (Fig. 1)
2. Fix the new luminaire cavity on the base, connect wires then close the cavity with two fixed screws (Fig. 3 A)
3. Pull out the two seal plugs if outdoor installation.
1. Open the fitting by unscrewing the two screws located by side of wall pack (Fig. A}, disconnect the wires between the luminaire cavity and base.
2. Drill holes on required mounting points on the wall (Fig B/C), mount wallpack base by securing mounting screws. (Fig 1)
3. Connect the supply wires to wall pack base wires.
4. Connect the cavity one side on the base, fix the wallpack with two screws after connecting inner wires. (Fig 2)
5. Pull out the two seal plugs if outdoor installation. (Fig 3 D)
Reviews
There are no reviews yet.